現在，隨著空氣增壓系統的逐步普及，市場對空氣增壓系統的要求也越來越多樣化，如高停低啟動、定時啟動、達到壓力時保持定時壓力等。 下面簡單介紹一下。
with the gradual popularization of air boosting systems, the market's requirements for air boosting systems are becoming increasingly diversified, such as high stop and low start, timed start, reaching pressure for timed pressure maintenance, and so on here, the editor will give you a brief introduction.
隨著科學技術的進步，空氣增壓系統的普及和節能。未來，對空氣增壓系統的效能和功能的要求會越來越高。 比如現在提倡的節能減排，要求空氣增壓系統以最小的消耗工作，而原有的空氣增壓系統無法達到目的，針對這種情況，精拓研發了高停低啟動空氣增壓系統，可以滿足空氣場所氣壓高時的工作條件， 氣壓低時壓力不足以滿足工況。高停低啟動空氣增壓系統採用智慧型晶元感知現場壓力的高低變化，通過比較設定氣壓壓力的上下線來判斷空氣增壓幫浦是否工作，當現場氣源達到定壓線時，智慧型晶元停止增壓幫浦的工作， 而且增壓幫浦是相當的管道，現場沒有氣源的消耗（高壓氣體通過增壓幫浦直接進入貨櫃罐，增壓幫浦在沒有智慧型晶元的情況下會反覆工作，消耗大部分能量）。當現場氣源達到設定壓力並下線時，證明壓力不能滿足現場使用要求，智慧型晶元會向空氣增壓幫浦發出開啟指令，空氣增壓幫浦將正常工作，保證裝置使用壓力的正常使用。
with the advancement of technology, the popularization of air boosting systems and energy conservation. in the future, there will be increasing demands for the performance and functionality of air boost systems. for example, the current promotion of energy conservation and emission reduction requires the air boost system to work at its maximum with minimal consumption. at this time, the original air boost system cannot achieve its goals. in response to this situation, a high stop low start air boost system has been developed. this system can meet the working conditions when the air pressure in the gas field is high, but cannot meet the working conditions when the pressure is low. the high stop low start air booster system uses intelligent chips to sense the changes in on-site pressure, and determines whether the air booster pump is working by comparing the upper and lower lines of the set air pressure. when the on-site air source reaches the pressure set upper line, the intelligent chip stops the operation of the booster pump, which acts as a pipeline, there is no consumption of the on-site gas source (high-pressure gas enters the container tank directly through the booster pump, and without intelligent chips, the booster pump will repeatedly work and consume a large part of the energy). when the on-site gas source reaches the set pressure offline, it proves that the pressure cannot meet the requirements for on-site use. the intelligent chip will issue an opening command to the air booster pump. at this time, the air booster pump will work normally to ensure the normal use of the equipment's operating pressure.