經過幾十年的快速發展，我國工業早已處於世界領先地位，在其領域對各種氣體源的應用越來越多，今天說說氧氣是其中一種特殊氣體，氧氣**有多種方式，但只能分為高壓氧源（鋼瓶高壓氧氣壓力13MPa）和低壓氧源（各種製氧機壓力一般為0.）。2-0.6MPa）。 下面將向您介紹如何將氧氣壓力提高到復合使用的壓力。
after decades of rapid development, china's industry has long been leading the world, and the application of various gas sources in its field is increasing. today, the editor will talk about one of the special gases, oxygen. oxygen can come from various sources, but can only be divided into high-pressure oxygen sources (steel cylinder high-pressure oxygen 13mpa pressure) and low-pressure oxygen sources (various oxygen concentrators generally h**e pressures between 0.2 and 0.6mpa). below we will introduce how to increase the oxygen pressure to the pressure for composite use.
增氧基本上是使用氣動增氧幫浦，其安全性可以是安全防爆的，因為它是由氣體驅動的，沒有電火花。 氧氣在工業中的作用大致可分為普通級和食品級，如製氧、制氧等均為普通級，食品級有藥用氧氣保護、氧氣淨化等。 在此給大家簡單介紹一下其兩型氧氣增壓幫浦的區別，普通液位的氧氣加壓壓力過高而無法滿足油液會導致**，精拓出廠時會經過特殊的脫脂和無油處理工藝。 食品級氧氣增壓幫浦採用304食品級不鏽鋼材料，由於衛生局規定金屬的加壓接觸氧部分採用304食品級不鏽鋼，有效防止氧化和二次汙染2-0.將 8 MPa 的氧氣加壓至 80 MPa，但不建議超過 30 MPa。 對於高壓氧氣瓶，有兩種選擇：京拓JTA系列或京拓JTD系列，兩者的主要區別在於加壓後的流量，如果不能滿足JTD系列，則可以併聯多個單元。
oxygen boosting is basically achieved by using pneumatic oxygen boosting pumps, which can be safely explosion-proof due to the use of gas driven non electric sparks. the role of oxygen in industry can be roughly divided into ordinary grade and food grade, such as oxygen cutting, oxygen assisted combustion, etc. are all ordinary grade, while food grade includes pharmaceutical oxygen protection, oxygen blowing, etc. here is a brief introduction to the differences between the two types of oxygen booster pumps. ordinary grade oxygen can cause explosions when the pressure is too high when it comes into contact with oil after being boosted. jingtuo will undergo a special process for degreasing and oil-free treatment when it le**es the factory. food grade oxygen booster pumps are all made of 304 food grade stainless steel material, which is required by the health bureau to increase the pressure of the metal in contact with oxygen. this effectively prevents oxidation and secondary pollution. for low-pressure oxygen sources, precision expansion two-stage booster pumps can be used to increase the original low-pressure oxygen from 0.2 to 0.8 mpa to 80 mpa, but it is not recommended to exceed 30 mpa. there are two options for high-pressure oxygen cylinders: jingtuo jta series or jingtuo jtd series. the main difference between these two is the flow rate after pressurization. if one jtd series cannot meet the requirements, multiple cylinders can be connected in parallel.
對於氧氣增壓，建議客戶選擇30MPa以上和密閉空間的氣動氧氣專用增壓幫浦，因為超過30MPa的氧氣在性質上極不穩定，非常容易遇到油和電火花。
for oxygen boosting, it is recommended that customers choose pneumatic oxygen specialized booster pumps for spaces exceeding 30mpa and enclosed spaces, as oxygen exceeding 30mpa is highly unstable and prone to explosion in the presence of oil and electric sparks.