眾所周知，氧氣具有化學反應性。 除了稀有氣體和金、鉑、銀等反應性較低的金屬元素外，大多數元素都能與氧氣發生反應，氧氣具有可燃性和氧化性。 由於氧氣的化學性質，氧氣加壓裝置必須以安全、防爆、無油的設計方式進行設計。
as is well known, the chemical properties of oxygen are relatively active. except for rare gases and low activity metal elements such as gold, platinum, and silver, most elements can react with oxygen, which has combustion and oxidation properties. due to the chemical properties of oxygen, oxygen boosting equipment must be designed in a safe, explosion-proof, and oil-free manner.
京拓牌大流量氧氣增壓充填裝置的開發解決了氧氣充填或加壓過程中遇到的問題，採用兩台二次幫浦併聯使用，加上氧氣增壓幫浦的核心部件進行特殊處理，可以達到：高效、節能、安全為一體的充填方式，更好地滿足客戶對充填和增壓的需求。
the development of jingtuo brand high flow oxygen boosting filling equipment has effectively solved the problems encountered during the filling or boosting process of oxygen. it uses two two-stage pumps in parallel, and the core component oxygen boosting pump is specially treated to achieve an efficient, energy-s**ing, and safe filling method, better meeting the filling and boosting needs of customers.
氧氣加壓裝置的原理。
the principle of oxygen boosting equipment
京拓牌JTD氧氣增壓幫浦系列是一種兩級增壓幫浦，可以在極低的壓力下將氧氣增加到非常高的壓力。 驅動氣體為 8 bar，氧氣入口的壓力範圍為 05-10bar，可增至30MPa。 整個氧氣增壓幫浦由鋁合金和不鏽鋼製成。 該系列的驅動活塞直徑為160公釐，幫浦頭兩端採用風冷排氣。 它可以使氧氣增壓幫浦在工作時溫度不會太高。 並且驅動空氣釋放後可以有效利用。
the jingtuo brand jtd oxygen booster pump series is a two-stage booster pump that can increase extremely low pressure oxygen to very high pressure. the driving gas is ≤ 8bar, and the pressure range of the oxygen input port is 0.5-10bar, which can increase to 30mpa. the entire oxygen booster pump is made of aluminum alloy and stainless steel. the driving piston diameter of this series of pumps is 160mm, and both pump heads are equipped with exhaust cooling. it can prevent the temperature of the oxygen booster pump from being too high during operation. and after driving the release of air, it can be effectively utilized.
氧氣充注系統引數（僅供參考，產品詳情請諮詢銷售工程師）。
oxygen filling system parameters
驅動氣壓：3-8 bar
drive air pressure: 3-8bar
進氣壓力範圍：05-10bar
inlet pressure range: 0.5-10bar
輸出壓力範圍：0-30MPa
output pressure range: 0-30mpa
輸出流量：380L以上
output flow rate: 380l/min
驅動口G1 2，進氧口Zg1 2，高壓出口ZG1 4（可根據客戶要求定製）。
drive port g1/2, oxygen inlet zg1/2, high-pressure outlet zg1/4 (can be customized according to customer requirements)